AIR QUALITY
AIR SUPPLY MUST BE FREE OF CONTAMINANTS
AND MOISTURE. FILTERED AIR SUPPLY TO
ISO 8573.1 QUALITY CLASS 3
CLASS: 3 (RECOMMENDED)
DIRT: 5 MICRON PARTICAL SIZE OR SMALLER
WATER: -4 F, PRESSURE DEWPOINT
(128 ppm. vol.) AT 100 psig
OIL: 1.0 mg/m**3 (INCLUDING VAPOR)
CLASS: 4 (MINIMUM)
DIRT: 15 MICRON PARTICAL SIZE OR SMALLER
WATER: +37.4 F, PRESSURE DEWPOINT
(940 ppm. vol.) AT 100 psig
OIL: 5 mg/m**3 (INCLUDING VAPOR)
STANDARD FEATURES
MOTORS: DUAL HR-4, MAX FORCE 30 to 36 N
TRAVEL: 150mm
SPEED: 250mm/sec MAX.
ENCODER OUTPUT: ANALOG 1 Vp-p (STANDARD)
OPTIONAL: 5um, 1um, 0.5um, 0.1um, 50nm, 20nm,10nm or 5nm
USING 4096 INTERPOLATION (NOTE 1.)
(CONSULT FACTORY FOR ADDITIONAL REQUIREMENTS)
SYSTEM REPEATABILITY: +/- 1 ENCODER COUNT (NOTE 1.)
LIMIT SWITCH SENSOR: STANDARD
BEARINGS: PRECISION AIR BEARING
REFER TO AIR PURITY SPECIFICATION
OPERATING PRESSURE: 60 PSIG TO 80 PSIG, 120 PSIG Max.
MAXIMUM LOAD RATING: 750N (@ 60 psig)
HORIZONTAL STRAIGHTNESS: 5 micro-inch /inch
VERTICAL STRAIGHTNESS: 5 micro-inch /inch
HORIZONTAL STIFFNESS: 105*10e6 N/m (600,000 lbs/in)
VERTICAL STIFFNESS: 140*10e6 N/m (800,000 lbs/in)
ENCLOSURES: ALUMINUM & GLASS
ATMOSPHERES: STANDARD & CLEAN ROOM
TEMPERATURE: 10 to 35 DEG C
HUMIDITY: 10% to 80% NON-CONDENSING
NOTE 1 - FOR OPTIMAL AXIS PERFORMANCE, ALIO
RECOMMENDS THE USAGE OF A DELTA TAU
PMAC2A-PC/104 CONTROLLER WITH THE DELTA TAU
ACCESSORY ACC-51S: 4096x SINUSOIDAL INTERPOLATOR.
ACCESSORIES
MOTOR AMPLIFIERS
OPTIONAL EQUIPMENT
MOTION CONTROLLERS
ENCODER INTERPOLATION, DESCRETE VALUE
CUSTOM DESIGNS FOR OEM INTEGRATION
ALIO INDUSTRIES PROPRIETARY INFORMATION
(Tel) 303.339.7500 - SALES@ALIOINDUSTRIES.COM - WWW.ALIOINDUSTRIES.COM
