USE IN-LINE PRESSURE SWITCH TO KILL MOTOR POWER
IF AIR PRESSURE DROPS BELOW RATED OPERATING VALUE
DO NOT OPERATE UNLESS AIR PRESSURE IS APPLIED!
ALIO INDUSTRIES PROPRIETARY INFORMATION!
ALIO INDUSTRIES11919 W I-70 FRONTAGE ROAD NORTH, UNIT 119
WHEAT RIDGE, CO 80033 USA
(Tel) 303.339.7500 - www.alioindustries.com
AIR QUALITY
AIR SUPPLY MUST BE FREE OF CONTAMINANTS
AND MOISTURE. FILTERED AIR SUPPLY TO
ISO 8573.1 QUALITY CLASS 3
CLASS: 3 (RECOMMENDED)
DIRT: 5 MICRON PARTICAL SIZE OR SMALLER
WATER: -4 F, PRESSURE DEWPOINT
(128 ppm. vol.) AT 100 psig
OIL: 1.0 mg/m**3 (INCLUDING VAPOR)
CLASS: 4 (MINIMUM)
DIRT: 15 MICRON PARTICAL SIZE OR SMALLER
WATER: +37.4 F, PRESSURE DEWPOINT
(940 ppm. vol.) AT 100 psig
OIL: 5 mg/m**3 (INCLUDING VAPOR)
STANDARD FEATURES
MOTOR: 200 N FORCE LINEAR MOTOR
INCLUDES: DIGITAL HALL EFFECT DEVICE
THERMISTOR, THERMOSTAT, HIGH FLEX CABLE
STANDARD TRAVEL: 100, 200, 400 AND 600mm
LONG TRAVEL: >2 METER TRAVEL AVAILABLE
SPEED: >1 meter/second
(ENCODER RESOLUTION AND COUNTER
CLOCK FREQUENCY DEPENDANT)
ENCODER OUTPUT: ANALOG 1 Vp-p (STANDARD)
OPTIONAL: 5um, 1um, 0.5um, 0.1um, 50nm, 20nm,
10nm or 5nm USING 4096 INTERPOLATION (NOTE 1.)
SYSTEM REPEATABILITY: +/- 1 ENCODER COUNT (NOTE 1.)
HOME SENSOR: STANDARD
BEARINGS: PRECISION AIR BEARING
REFER TO AIR PURITY SPECIFICATION
OPERATING PRESSURE: 60 PSIG TO 80 PSIG, 120 PSIG Max.
MAXIMUM LOAD RATING: 750N (@ 60 psig)
HORIZONTAL STRAIGHTNESS: 5 micro-inch /inch
VERTICAL STRAIGHTNESS: 5 micro-inch /inch
HORIZONTAL STIFFNESS: >1,000,000 lbs/in
VERTICAL STIFFNESS: >1,000,000 lbs/in
ENCLOSURES: ALUMINUM
ATMOSPHERES: STANDARD & CLEAN ROOM
TEMPERATURE: 10 to 35 DEG C
HUMIDITY: 10% to 80% NON-CONDENSING
NOTE 1 - FOR OPTIMAL AXIS PERFORMANCE, ALIO
RECOMMENDS THE USAGE OF A DELTA TAU
PMAC2A-PC/104 CONTROLLER WITH THE DELTA TAU
ACCESSORY ACC-51S: 4096x SINUSOIDAL INTERPOLATOR.
ACCESSORIES
MOTOR AMPLIFIERS
OPTIONAL EQUIPMENT
MOTION CONTROLLERS
ENCODER INTERPOLATION, DESCRETE VALUE
CUSTOM DESIGNS FOR OEM INTEGRATION
