USE IN-LINE PRESSURE SWITCH TO KILL MOTOR POWER
IF AIR PRESSURE DROPS BELOW RATED OPERATING VALUE
DO NOT OPERATE UNLESS AIR PRESSURE IS APPLIED!
ALIO INDUSTRIES PROPRIETARY INFORMATION!
ALIO INDUSTRIES11919 W I-70 FRONTAGE ROAD NORTH, UNIT 119
WHEAT RIDGE, CO 80033 USA
(Tel) 303.339.7500 - www.alioindustries.com
AIR QUALITY
AIR SUPPLY MUST BE FREE OF CONTAMINANTS
AND MOISTURE. FILTERED AIR SUPPLY TO
ISO 8573.1 QUALITY CLASS 3
CLASS: 3 (RECOMMENDED)
DIRT: 5 MICRON PARTICAL SIZE OR SMALLER
WATER: -4 F, PRESSURE DEWPOINT
(128 ppm. vol.) AT 100 psig
OIL: 1.0 mg/m**3 (INCLUDING VAPOR)
CLASS: 4 (MINIMUM)
DIRT: 15 MICRON PARTICAL SIZE OR SMALLER
WATER: +37.4 F, PRESSURE DEWPOINT
(940 ppm. vol.) AT 100 psig
OIL: 5 mg/m**3 (INCLUDING VAPOR)
STANDARD FEATURES
MOTORS: DUAL HR-4, MAX FORCE 30 to 36 N
TRAVEL: 600mm
SPEED: 250mm/sec MAX.
ENCODER OUTPUT: ANALOG 1 Vp-p (STANDARD)
OPTIONAL: 5um, 1um, 0.5um, 0.1um, 50nm, 20nm, 10nm, or 5nm
USING 4096 INTERPOLATION. (CONTROLLER DEPENDENT)
(CONSULT FACTORY FOR ADDITIONAL REQUIREMENTS)
SYSTEM REPEATABILITY: +/- 2 ENCODER COUNTS
(CONTROLLER DEPENDENT)
HOME: STANDARD
BEARINGS: PRECISION AIR BEARING
NOT TO EXCEED AIR QUALITY SPECIFICATION
ENCLOSURES: ALUMINUM
ATMOSPHERES: STANDARD & CLEAN ROOM
TEMPERATURE: 10 to 35 DEG C
HUMIDITY: 10% to 80% NON-CONDENSING
ASSEMBLY MASS: 13.8 kg (MOVING MASS: 1.9 kg)
AIR BEARING PERFORMANCE SPECIFICATIONS
OPERATING PRESSURE: 60 PSIG TO 80 PSIG, 120 PSIG MAX.
MAXIMUM LOAD RATING: 63 kg (139 lbs) (@ 60 psig)
HORIZONTAL STRAIGHTNESS: 0.25 um / 25 mm (10 micro-inch /inch)
VERTICAL STRAIGHTNESS: 0.25 um / 25 mm (10 micro-inch /inch)
HORIZONTAL STIFFNESS: 105*10e6 N/m (600,000 lbs/in)
VERTICAL STIFFNESS: 250*10e6 N/m (1,400,000 lbs/in)
PITCH MOMENT: 20 N-m (177 in-lbs)
ROLL MOMENT: 24 N-m (212 in-lbs)
YAW MOMENT: 10 N-m (89 in-lbs)
ALL SPECIFICATIONS LISTED FOR 60 psig OPERATING PRESSURE
LOADING, STIFFNESS, AND MOMENT SPECIFICATIONS INCREASE
AT HIGHER OPERATING PRESSURES
ACCESSORIES
MOTOR AMPLIFIERS
OPTIONAL EQUIPMENT
MOTION CONTROLLERS
CUSTOM DESIGNS FOR OEM INTEGRATION
